Search
Filters

PVD MP CNC Table Prices

  • 2' x 4' - From $8,990
  • 4' x 4' - From $9,990
  • 4' x 6' - From $11,490
  • 4' x 8' - From $12,990
  • 5' x 10' - From $15,990
  • JD Squared continues their mission to provide the most robust equipment at an affordable price by introducing the PVD MP Series CNC Table. This new line of multiplatform tables gives the customer versatility to change between different types of tables, at an affordable price.

    Manufacturer: JD Squared, Inc.

    PVD MP CNC Table Specifications Summary

    Available Table Sizes2' x 4', 4' x 4', 4' x 6', 4' x 8', 5' x 10'
    Maximum plate thickness1.5"
    Rapid Speeds600 IPM
    MotorsBrushless servo on all axes
    Machine Power Requirements190-240VAC, 1PH, 50/60Hz, 15A. Machine only. Optional automatic router control increases required amperage to 30A.
    Plasma CompatibilityThe PVD MP Series requires a machine controllable plasma power unit, which is basically a way to turn the torch on and off automatically. A Begin Traverse, also known as Arc Okay, signal is accepted but not required for operation. If you're not sure if your existing plasma power supply is compatible, contact a sales representative and we'll look into it.
    Wood Router CompatibilityThe PVD MP Series requires a standard hand router. If the optional automatic router control is being used, the maximum allowable amperage for the router is 15A.
    Table OptionsThe PVD MP Series can be supplied as an Air Table or Wood Router Table at no additional cost. A Water Table is available for an additional cost.
    ShippingThese tables arrive partially assembled and require the end user to assemble the frame. This allows us to ship in a smaller footprint to save you on freight costs.

    Why Water Table?

    PVD Water Table

    Advantages

    • Most cost effective way to capture most (but not all) fumes and slag.
    • Minor cooling effect on material being cut if slats adjusted close to water level.

    Disadvantages

    • Messy. Really messy. No seriously, they make a mess.
    • Steel sheets should be removed and dried after cutting to prevent corrosion. Additives to the table, such as Pico Quench Guard can help reduce corrosion and organics growing in the table.
    • Shallower bed depth limits plasma unit power to 125A and below. This limits the operator to 1" mild steel and thinner.

    Why Air Table?

    Mad Air Table

    Advantages

    • When matched with a suitably sized air handler, excess smoke and fumes are captured more efficiently.
    • Extra bed clearance allows for the largest plasma units, up to 400A, and 1.5" mild steel plate thicknesses.

    Disadvantages

    • Cost of an air handler. Without an air handler, a large amount of smoke and fumes are produced.
    • Since there is no cutting fluid, no cooling effect on thin gauge material.

    Why Wood Router Table?

    PVD Wood Router Table

    Advantages

    • Allows level installation of a spoil board.

    Disadvantages

    • When in the wood router configuration it's not ideal to plasma cut.

    A Solid Foundation

    Big machine features, small machine price.

    The PVD MP Series CNC Tables are configurable to use either an air table, water table, or wood routing table. All share tough design features detailed by Bob in this introduction video.

    Precision Machined Frame.

    All steel construction has been precision machined to guarantee parallelism of the V-Groove supporting the alloy steel rail, and the 3/4" ground facing gear rack. The frame sides are keyed to make assembly a breeze.

    V-Groove photo

    Optional Extended Gantry

    The extended gantry option allows the head to extend past the edge of the standard table to cut or route material that would not normally fit on the table. For example, cutting into square tubing using a sawhorse as support.

    Exended Gantry

    Flexible slat height.

    Vertical adjusters raise the support slats for easy loading, or lower them for use with water.

    Adjustable Slats Air Adjustable Slats Water

    Choose your curve.

    Selectable slat curvature. Choose straight to easily slide material onto the table, or pick Half Arc or Full Arc to support small parts and lighter material.

    Straight slats photo

    The X and Z Axes

    Universal. Ready for plasma.

    The face plate of the X-Axis Carriage is universal to accept many types of tools. By default, it is configured with two magnetic docking stations, and a Z-Axis unit plasma ready.

    X carriage plate photo

    Z Axis - Protection built in.

    The Z-Axis rides on a 25mm linear guide behind protective covers. It includes magnetic torch break-away with automated sensing, and dual probing methods: ohmic contact, and floating head for when electrical contact cannot be sensed.

    Z axis switch

    Brushless servo motors. Everywhere.

    All axes are driven using high quality brushless servo motors to get the speed we desire: 600 I.P.M. rapids. Application specific motor power supplies keep the machine running all day.

    Motor photo

    Hardened machine control.

    Custom robust control electronics are reinforced, and isolated to protect sensitive circuits from damaging currents. Since we build it, obsolescence isn't a problem.

    Control photo

    Automatic Torch Height Control.

    Yes, it's included. The custom ATHC is capable of measuring a divided feedback voltage provided by the most popular plasma power units.

    User Interface Computer.

    The PVD MP CNC tables does include a computer stand, but the computer is required to be purchased by the end user. Either supply your own PC or purchase an industrial NUC PC from us.

    PC photo

    Constantly improving Machine Control Interface.

    The latest version of our control software keeps improving. Easy to operate, easy to select cut settings, and easy to restart. The software automatically updates itself for bug fixes and select feature sets if connected to the internet. No subscription required, included for free.

    Software Screenshot

    Configured to Your Needs.

    The MP Series is designed for configuration. Available Options Include:.

    • Standard or Extended Gantry
    • Starting Table Type - Choose between Air and Wood Routing or Select Water for an additional cost.
    • The Air configuration is upgradable with tray and deflector Options.
    • Purchase one of two router attachment sizes to complete the Wood Router configuration.
    • The Water Table comes in powder coated steel or stainless steel.
    • An available water sump system allows you to raise and lower the water level for cutting, part retrieval and cleaning.
    • Compatible with the XL Marking System for drawing or engraving.

    Additional Videos

    Checkout more videos on our YouTube channel

    PVD MP CNC Table Specifications Summary

    Available Table Sizes2' x 4', 4' x 4', 4' x 6', 4' x 8', 5' x 10'
    Maximum plate thickness1.5"
    Rapid Speeds600 IPM
    MotorsBrushless servo on all axes
    Machine Power Requirements190-240VAC, 1PH, 50/60Hz, 15A. Machine only. Optional automatic router control increases required amperage to 30A.
    Plasma CompatibilityThe PVD MP Series requires a machine controllable plasma power unit, which is basically a way to turn the torch on and off automatically. A Begin Traverse, also known as Arc Okay, signal is accepted but not required for operation. If you're not sure if your existing plasma power supply is compatible, contact a sales representative and we'll look into it.
    Wood Router CompatibilityThe PVD MP Series requires a standard hand router. If the optional automatic router control is being used, the maximum allowable amperage for the router is 15A.
    Table OptionsThe PVD MP Series can be supplied as an Air Table or Wood Router Table at no additional cost. A Water Table is available for an additional cost.
    ShippingThese tables arrive partially assembled and require the end user to assemble the frame. This allows us to ship in a smaller footprint to save you on freight costs.

    Why Water Table?

    PVD Water Table

    Advantages

    • Most cost effective way to capture most (but not all) fumes and slag.
    • Minor cooling effect on material being cut if slats adjusted close to water level.

    Disadvantages

    • Messy. Really messy. No seriously, they make a mess.
    • Steel sheets should be removed and dried after cutting to prevent corrosion. Additives to the table, such as Pico Quench Guard can help reduce corrosion and organics growing in the table.
    • Shallower bed depth limits plasma unit power to 125A and below. This limits the operator to 1" mild steel and thinner.

    Why Air Table?

    Mad Air Table

    Advantages

    • When matched with a suitably sized air handler, excess smoke and fumes are captured more efficiently.
    • Extra bed clearance allows for the largest plasma units, up to 400A, and 1.5" mild steel plate thicknesses.

    Disadvantages

    • Cost of an air handler. Without an air handler, a large amount of smoke and fumes are produced.
    • Since there is no cutting fluid, no cooling effect on thin gauge material.

    Why Wood Router Table?

    PVD Wood Router Table

    Advantages

    • Allows level installation of a spoil board.

    Disadvantages

    • When in the wood router configuration it's not ideal to plasma cut.

    A Solid Foundation

    Big machine features, small machine price.

    The PVD MP Series CNC Tables are configurable to use either an air table, water table, or wood routing table. All share tough design features detailed by Bob in this introduction video.

    Precision Machined Frame.

    All steel construction has been precision machined to guarantee parallelism of the V-Groove supporting the alloy steel rail, and the 3/4" ground facing gear rack. The frame sides are keyed to make assembly a breeze.

    V-Groove photo

    Optional Extended Gantry

    The extended gantry option allows the head to extend past the edge of the standard table to cut or route material that would not normally fit on the table. For example, cutting into square tubing using a sawhorse as support.

    Exended Gantry

    Flexible slat height.

    Vertical adjusters raise the support slats for easy loading, or lower them for use with water.

    Adjustable Slats Air Adjustable Slats Water

    Choose your curve.

    Selectable slat curvature. Choose straight to easily slide material onto the table, or pick Half Arc or Full Arc to support small parts and lighter material.

    Straight slats photo

    The X and Z Axes

    Universal. Ready for plasma.

    The face plate of the X-Axis Carriage is universal to accept many types of tools. By default, it is configured with two magnetic docking stations, and a Z-Axis unit plasma ready.

    X carriage plate photo

    Z Axis - Protection built in.

    The Z-Axis rides on a 25mm linear guide behind protective covers. It includes magnetic torch break-away with automated sensing, and dual probing methods: ohmic contact, and floating head for when electrical contact cannot be sensed.

    Z axis switch

    Brushless servo motors. Everywhere.

    All axes are driven using high quality brushless servo motors to get the speed we desire: 600 I.P.M. rapids. Application specific motor power supplies keep the machine running all day.

    Motor photo

    Hardened machine control.

    Custom robust control electronics are reinforced, and isolated to protect sensitive circuits from damaging currents. Since we build it, obsolescence isn't a problem.

    Control photo

    Automatic Torch Height Control.

    Yes, it's included. The custom ATHC is capable of measuring a divided feedback voltage provided by the most popular plasma power units.

    User Interface Computer.

    The PVD MP CNC tables does include a computer stand, but the computer is required to be purchased by the end user. Either supply your own PC or purchase an industrial NUC PC from us.

    PC photo

    Constantly improving Machine Control Interface.

    The latest version of our control software keeps improving. Easy to operate, easy to select cut settings, and easy to restart. The software automatically updates itself for bug fixes and select feature sets if connected to the internet. No subscription required, included for free.

    Software Screenshot

    Configured to Your Needs.

    The MP Series is designed for configuration. Available Options Include:.

    • Standard or Extended Gantry
    • Starting Table Type - Choose between Air and Wood Routing or Select Water for an additional cost.
    • The Air configuration is upgradable with tray and deflector Options.
    • Purchase one of two router attachment sizes to complete the Wood Router configuration.
    • The Water Table comes in powder coated steel or stainless steel.
    • An available water sump system allows you to raise and lower the water level for cutting, part retrieval and cleaning.
    • Compatible with the XL Marking System for drawing or engraving.

    Additional Videos

    Checkout more videos on our YouTube channel

    *
    *
    *
    This product is sold out