TN-100 Tube Notcher

Hole saw tube notcher that is able to straight and angle notch.

Tube Capacity 3/4" to 2"

$225.00
Part Number 100477

The TN-100 tube notcher is known for its high-quality, long life, and accuracy.

CNC Machined.

3/4" ground and polished stainless steel shaft.

Tube Capacity 3/4" to 2" diameter at angles up to 50 degrees in under 15 seconds.

EASY TO USE - The TN-100 may be clamped in a vise or bolted to a table and used with a 1/2" hand drill. In this way the TN-100 can be laid horizontal and when notching 45 degree angles the floor will not interfere with the tubing being notched. Also, since the hand drill is fed in horizontally, the drill's weight doesn't try to force the hole saw in too fast. 

GROUND AND POLISHED STAINLESS STEEL SHAFT & RIGID BEARING BLOCK - This is the most critical part of a hole saw style notcher. The TN-100 utilizes a ground & polished stainless steel shaft riding in a bearing block incorporating twin needle bearings and separate grease seals for maximum rigidity and reliability.