International Distributors International Distributors
 
 
 Menu  
•Home Home
•Model 3 Bender Model 3 Bender
•Model 4 Bender Model 4 Bender
•Model 32 Bender Model 32 Bender
•TN-100 Tube Notcher TN-100 Tube Notcher
•Notch Master Notch Master
•Beast Notcher Beast Notcher
•Bend Software Bend Software
•Printable Manuals Printable Manuals
•Hydraulic Specs Hydraulic Specs
•FAQ FAQ
•Warranty Warranty
•Contact Us Contact Us
•International Distributors International Distributors
SS
 Model 32 Bender  
Model 32 Bender
$545 Mechanical (Limited Time Only $395)
$995 with 10 Ton Hydraulic Cylinder (less hose and pump) (Limited Time Only $799)

Shown above is the hydraulic configuration. 10 ton cylinder is included. Die sets, pumps, hoses and stand are sold separately.

The Model 32 is essentially a super heavy duty version of the Model 3. The Model 3 is the best selling USA made bender in the world. However, when we initially designed it in the mid 1980's it was a mechanical bender targeted at racecar builders who wanted an affordable bender which still produced high quality bends. Hydraulics wasn't added until years later.

Fast forward 25 years and builders have changed gears. Now, rock crawler builders need to bend 2" o.d. x .250" wall dom tubing and thin wall tubing is now more common than it was back then. We knew the basic principle of the Model 3 was near impossible to beat so the answer was to simply make it better. The Model 32 is the result.

Model 32 - Mechanical
Model 32 - Hydraulic


Differences between the two benders are:
  • Frame strength has been more than doubled.
  • 7/8" diameter 100,000 psi alloy pins were upgraded to 1 1/4" diameter.
  • A die locking mechanism was designed that both helps bend thin wall tubing as well as very heavy walled tubing by preventing the die from relaxing when not bending. Springback is the #1 cause of wrinkling thin walled tubing.
  • The Model 32 has been designed for mechanical or hydraulic operation from day one. Its hydraulic swivel block rotates on the cylinders true center axis thereby eliminating side load on the ram during bending. This greatly extends the life of the cylinder. A one piece steel ram yoke with quick disconnect pin is now incorporated as well.
  • An anti- springback ratchet is now included free with the bender. This allowed us to design a new ratchet lever system with more than a 20% reduction in bending effort.
  • Geometry of the bender itself was altered to take better advantage of the new generation 3 followbars thus yielding better bends.
  • Drive link bolts and sleeves sizes have increased from 1/2" diameter to 3/4" to handle the extra load.

RUGGED ALL STEEL CONSTRUCTION - Designed with durability and affordability in mind. All parts are 100% CNC machined. The frame links are machined from 3/4" thick steel and the drive links are made from 1/2" thick cold rolled steel. Compared to the Model 3's 7/8" diameter pins the Model 32 utilizes extra large 1 1/4" diameter 100,000 PSI alloy pins to handle the tough bends. Fast change bending dies are CNC machined from solid steel billets and carry a lifetime guarantee against breakage. Steel dies eliminate the problems common with other manufacturers' aluminum dies, such as breakage and groove spreading when bending 4130 chromemoly tubing.

LARGE CAPACITY - Bends round tubing and pipe from 1/2" to 2 1/2" O.D. and square tubing from 1/2" to 1-1/2". This bender is rated to bend 2" o.d. x .250" wall DOM steel tubing. Also capable of solid steel up to 1 1/2" diameter.NOTE: To bend round tubing over 2" o.d. x .120" wall, square tubing over 1 1/2" or solids over 1" diameter requires hydraulics.

EASY OPERATION - The Model 32 uses a high-ratio ratchet mechanism to allow you to bend larger tubing sizes comfortably without assistance. For example, the average operator can bend 1 3/4" x .095" wall round mild steel tubing with one hand and 1" x .065" wall tubing with ONE finger. Dies can be changed in under 30 seconds. Bend times are typically in the 30-60 second range for 1" O.D. and above tubing using the ratchet mechanism. Hydraulics may be slightly slower or faster depending on the power unit chosen.

HIGHLY ACCURATE - With the degree indicator wheel standard on every Model 32, accurate bending is simply a matter of watching the pointer until the degree of bend you desire is reached. High contrast yellow markings on a black wheel provide excellent readability while bending.

DIE LOCKING MECHANISM
Standard on every Model 32 is the die locking mechanism. As the die rotates while bending the drive holes in the forming die pass under the lock pin. When the drive hole is below the lock pin, it drops into the drive hole and when pressure is removed from the bender the die's rotation is locked at that position. When bending resumes the ramp machined into the lock pin will automatically lift the pin out of the drive hole. This mechanism combined with the included anti-springback ratchet allows the Model 32 to better bend thin wall tubing as well as the heavier sizes of tubing such as 2" o.d. x .250" wall DOM tubing.
DEGREE POINTER
Standard on every Model 32 is a quick adjust degree indicator wheel. Simply loosen the lower nut as shown in the picture to the right, rotate the degree wheel to zero degrees and using finger force only, tighten in position.
36" TELESCOPING HANDLE
Included free with bender. The new design has twice the bearing area of the old style for longer life and provides ample leverage for tube sizes up to 1 3/4".However, if more leverage is desired for tougher to bend applications, you now can simply obtain a longer piece of standard 1" schedule 40 pipe and insert it into the ratchet lever. Comes standard with a pull pin so the handle may be retracted out of the way when not in use saving valuable floor space.
NEWLY DESIGNED GENERATION 3 FOLLOW BARS
They are half the weight of the older style and utilize bolt-on inserts that are on average 243% stronger. Insert pads are machined to within 1/1000th of a degree to the theoretically perfect angle for optimum bend quality. Inserts are made from a non-galling bearing material to prevent scratching of expensive material. Delrin inserts are also available for use with polished aluminum. A roll pin holds the follow bar in position while loading tubing. With over 600 hours in R&D and tooling preparation, we are confident these are the best die sets on the market today.
CENTER PIVOT HYDRAULIC CYLINDER
The hydraulic swivel block rotates on the cylinders true center axis thereby eliminating side load on the ram during bending. This greatly extends the life of the cylinder. A one piece steel ram yoke with quick disconnect pin is now incorporated as well.
4000 PSI Electric Pump with Hose - $1345 through JD2 only $895.00

Includes 5,000 psi hydraulic hose w/ quick disconnect coupler. Single-Phase 110VAC. Approximately 3 times the speed of the air/hydraulic pump.
Custom die sets are available. Please call for pricing.
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
302100M32B Round Tube Die Set - 1/2" (2.25-180)180.035"135
302101M32B Round Tube Die Set - 1/2" (3-180)180.035"145
302102M32B Round Tube Die Set - 5/8" (2.25-180)180.049"135
302103M32B Round Tube Die Set - 5/8" (3-180)180.049"145
302104M32B Round Tube Die Set - 3/4" (2.25-180)180.058"135
302105M32B Round Tube Die Set - 3/4" (3-180)180.058"145
302106M32B Round Tube Die Set - 3/4" (3.5-180)180.058"165
302107M32B Round Tube Die Set - 3/4" (4.5-180)180.058"225
302108M32B Round Tube Die Set - 3/4" (4.5-90)90.058"195
302109M32B Round Tube Die Set - 3/4" (5.5-180)180.058"250
302110M32B Round Tube Die Set - 3/4" (5.5-90)90.058"220
302117M32B Round Tube Die Set - 7/8" (3-180)180.058"145
302118M32B Round Tube Die Set - 7/8" (4.5-180)180.058"225
302119M32B Round Tube Die Set - 7/8" (4.5-90)90.058"195
302120M32B Round Tube Die Set - 7/8" (5.5-180)180.058"250
302121M32B Round Tube Die Set - 7/8" (5.5-90)90.058"220
302122M32B Round Tube Die Set - 1" (3-180)180.058"155
302123M32B Round Tube Die Set - 1" (3.5-180)180.058"175
302124M32B Round Tube Die Set - 1" (4.5-180)180.058"235
302125M32B Round Tube Die Set - 1" (4.5-90)90.058"205
302126M32B Round Tube Die Set - 1" (5.5-180)180.058"260
302127M32B Round Tube Die Set - 1" (5.5-90)90.058"230
302136M32B Round Tube Die Set - 1 1/8" (3.5-180)180.083"180
302137M32B Round Tube Die Set - 1 1/8" (4.5-180)180.058"245
302138M32B Round Tube Die Set - 1 1/8" (4.5-90)90.058"215
302139M32B Round Tube Die Set - 1 1/8" (5.5-180)180.058"270
302140M32B Round Tube Die Set - 1 1/8" (5.5-90)90.058"240
302141M32B Round Tube Die Set - 1 1/8" (6.5-180)180.058"280
302142M32B Round Tube Die Set - 1 1/8" (6.5-90)90.058"250
302143M32B Round Tube Die Set - 1 1/4" (3.5-180)180.083"180
302144M32B Round Tube Die Set - 1 1/4" (4.5-180)180.058"245
302145M32B Round Tube Die Set - 1 1/4" (4.5-90)90.058"215
302146M32B Round Tube Die Set - 1 1/4" (5.5-180)180.058"270
302147M32B Round Tube Die Set - 1 1/4" (5.5-90)90.058"240
302148M32B Round Tube Die Set - 1 1/4" (6.5-180)180.058"280
302149M32B Round Tube Die Set - 1 1/4" (6.5-90)90.058"250
302159M32B Round Tube Die Set - 1 3/8" (4.5-180)180.095"265
302160M32B Round Tube Die Set - 1 3/8" (4.5-90)90.095"225
302161M32B Round Tube Die Set - 1 3/8" (5.5-180)180.065"280
302162M32B Round Tube Die Set - 1 3/8" (5.5-90)90.065"240
302163M32B Round Tube Die Set - 1 3/8" (6.5-180)180.065"290
302164M32B Round Tube Die Set - 1 3/8" (6.5-90)90.065"250
302165M32B Round Tube Die Set - 1 3/8" (7.5-180)180.058"375
302166M32B Round Tube Die Set - 1 3/8" (7.5-90)90.058"335
302167M32B Round Tube Die Set - 1 1/2" (4.5-180)180.095"265
302168M32B Round Tube Die Set - 1 1/2" (4.5-90)90.095"225
302170M32B Round Tube Die Set - 1 1/2" (5.5-180)180.083"280
302171M32B Round Tube Die Set - 1 1/2" (5.5-90)90.083"240
302172M32B Round Tube Die Set - 1 1/2" (6.5-180)180.058"290
302173M32B Round Tube Die Set - 1 1/2" (6.5-90)90.058"275
302174M32B Round Tube Die Set - 1 1/2" (7.5-180)180.058"385
302175M32B Round Tube Die Set - 1 1/2" (7.5-90)90.058"345
302178M32B Round Tube Die Set - 1 5/8" (5.5-180)180.083"290
302179M32B Round Tube Die Set - 1 5/8" (5.5-90)90.083"250
302180M32B Round Tube Die Set - 1 5/8" (6.5-180)180.083"300
302181M32B Round Tube Die Set - 1 5/8" (6.5-90)90.083"260
302182M32B Round Tube Die Set - 1 5/8" (7.5-180)180.058"385
302183M32B Round Tube Die Set - 1 5/8" (7.5-90)90.058"345
302192M32B Round Tube Die Set - 1 3/4" (5.5-180)180.095"300
302193M32B Round Tube Die Set - 1 3/4" (5.5-90)90.095"260
302194M32B Round Tube Die Set - 1 3/4" (6.5-180)180.083"315
302195M32B Round Tube Die Set - 1 3/4" (6.5-90)90.083"275
302196M32B Round Tube Die Set - 1 3/4" (7.5-180)180.058"385
302197M32B Round Tube Die Set - 1 3/4" (7.5-90)90.058"345
302198M32B Round Tube Die Set - 1 7/8" (6.5-180)180.095"345
302199M32B Round Tube Die Set - 1 7/8" (6.5-90)90.095"295
302200M32B Round Tube Die Set - 1 7/8" (7.5-180)180.095"395
302201M32B Round Tube Die Set - 1 7/8" (7.5-90)90.095"355
302208M32B Round Tube Die Set - 2" (6.5-180)180.095"345
302209M32B Round Tube Die Set - 2" (6.5-90)90.095"295
302210M32B Round Tube Die Set - 2" (7.5-180)180.095"405
302211M32B Round Tube Die Set - 2" (7.5-90)90.095"355
302212M32B Round Tube Die Set - 2 1/8" (6.5-180)180.095"475
302213M32B Round Tube Die Set - 2 1/8" (6.5-90)90.095"425
302214M32B Round Tube Die Set - 2 1/8" (7.5-180)180.095"525
302215M32B Round Tube Die Set - 2 1/8" (7.5-90)90.095"475
302216M32B Round Tube Die Set - 2 1/4" (6.5-180)180.095"475
302217M32B Round Tube Die Set - 2 1/4" (6.5-90)90.095"425
302218M32B Round Tube Die Set - 2 1/4" (7.5-180)180.095"525
302219M32B Round Tube Die Set - 2 1/4" (7.5-90)90.095"475
302220M32B Round Tube Die Set - 2 3/8" (6.5-180)180.095"475
302221M32B Round Tube Die Set - 2 3/8" (6.5-90)90.095"425
302222M32B Round Tube Die Set - 2 3/8" (7.5-180)180.095"525
302223M32B Round Tube Die Set - 2 3/8" (7.5-90)90.095"475
302230M32B Round Tube Die Set - 2 1/2" (6.5-180)180.095"475
302231M32B Round Tube Die Set - 2 1/2" (6.5-90)90.095"425
302232M32B Round Tube Die Set - 2 1/2" (7.5-180)180.095"525
302233M32B Round Tube Die Set - 2 1/2" (7.5-90)90.095"475
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
302111M32B Pipe Die Set - 1/2" Pipe, .840" OD (3-180)180Sch 40150
302112M32B Pipe Die Set - 1/2" Pipe, .840" OD (3.5-180)180Sch 40165
302113M32B Pipe Die Set - 1/2" Pipe, .840" OD (4.5-180)180Sch 40230
302114M32B Pipe Die Set - 1/2" Pipe, .840" OD (4.5-90)90Sch 40200
302115M32B Pipe Die Set - 1/2" Pipe, .840" OD (5.5-180)180Sch 40270
302116M32B Pipe Die Set - 1/2" Pipe, .840" OD (5.5-90)90Sch 40240
302128M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (3-180)180Sch 40155
302129M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (3.5-180)180Sch 40175
302130M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (4.5-180)180Sch 40240
302131M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (4.5-90)90Sch 40210
302132M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (5.5-180)180Sch 40275
302133M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (5.5-90)90Sch 40245
302134M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (6.5-180)180Sch 40280
302135M32B Pipe Die Set - 3/4" Pipe, 1.050" OD (6.5-90)90Sch 40250
302150M32B Pipe Die Set - 1" Pipe, 1.315" OD (3.5-180)180Sch 40185
302151M32B Pipe Die Set - 1" Pipe, 1.315" OD (4.5-180)180Sch 40250
302152M32B Pipe Die Set - 1" Pipe, 1.315" OD (4.5-90)90Sch 40220
302153M32B Pipe Die Set - 1" Pipe, 1.315" OD (5.5-180)180Sch 40270
302154M32B Pipe Die Set - 1" Pipe, 1.315" OD (5.5-90)90Sch 40240
302155M32B Pipe Die Set - 1" Pipe, 1.315" OD (6.5-180)180Sch 40280
302156M32B Pipe Die Set - 1" Pipe, 1.315" OD (6.5-90)90Sch 40250
302157M32B Pipe Die Set - 1" Pipe, 1.315" OD (7.5-180)180Sch 40375
302158M32B Pipe Die Set - 1" Pipe, 1.315" OD (7.5-90)90Sch 40345
302224M32B Pipe Die Set - 2" Pipe, 2.375" OD (5.5-180)180Sch 40450
302225M32B Pipe Die Set - 2" Pipe, 2.375" OD (5.5-90)90Sch 40400
302226M32B Pipe Die Set - 2" Pipe, 2.375" OD (6.5-180)180Sch 40475
302227M32B Pipe Die Set - 2" Pipe, 2.375" OD (6.5-90)90Sch 40425
302228M32B Pipe Die Set - 2" Pipe, 2.375" OD (7.5-180)180Sch 40525
302229M32B Pipe Die Set - 2" Pipe, 2.375" OD (7.5-90)90Sch 40475
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
303000M32B Square Die Set - 1/2" (3-180)180.083"160
303001M32B Square Die Set - 1/2" (3.5-180)180.083"180
303002M32B Square Die Set - 1/2" (4.5-180)180.065"255
303003M32B Square Die Set - 1/2" (4.5-90)90.065"225
303004M32B Square Die Set - 1/2" (5.5-180)180.083"280
303005M32B Square Die Set - 1/2" (5.5-90)90.083"250
303006M32B Square Die Set - 1/2" (6.5-180)180.083"300
303007M32B Square Die Set - 1/2" (6.5-90)90.083"270
303008M32B Square Die Set - 3/4" (3-180)180.095"165
303009M32B Square Die Set - 3/4" (3.5-180)180.083"190
303010M32B Square Die Set - 3/4" (4.5-180)180.065"265
303011M32B Square Die Set - 3/4" (4.5-90)90.065"235
303012M32B Square Die Set - 3/4" (5.5-180)180.065"285
303013M32B Square Die Set - 3/4" (5.5-90)90.065"255
303014M32B Square Die Set - 3/4" (6.5-180)180.065"305
303015M32B Square Die Set - 3/4" (6.5-90)90.065"275
303016M32B Square Die Set - 1" (3.5-180)180.095"195
303017M32B Square Die Set - 1" (4.5-180)180.083"280
303018M32B Square Die Set - 1" (4.5-90)90.083"240
303019M32B Square Die Set - 1" (5.5-180)180.065"300
303020M32B Square Die Set - 1" (5.5-90)90.065"260
303021M32B Square Die Set - 1" (6.5-180)180.065"320
303022M32B Square Die Set - 1" (6.5-90)90.065"280
303023M32B Square Die Set - 1 1/4" (4.5-180)180.095"285
303024M32B Square Die Set - 1 1/4" (4.5-90)90.095"245
303025M32B Square Die Set - 1 1/4" (5.5-180)180.083"300
303026M32B Square Die Set - 1 1/4" (5.5-90)90.083"260
303027M32B Square Die Set - 1 1/4" (6.5-180)180.083"320
303028M32B Square Die Set - 1 1/4" (6.5-90)90.083"280
303029M32B Square Die Set - 1 1/2" (4.5-180)180.083"300
303030M32B Square Die Set - 1 1/2" (4.5-90)90.083"260
303031M32B Square Die Set - 1 1/2" (5.5-180)180.083"320
303032M32B Square Die Set - 1 1/2" (5.5-90)90.083"280
303033M32B Square Die Set - 1 1/2" (6.5-180)180.083"335
303034M32B Square Die Set - 1 1/2" (6.5-90)90.083"295
303035M32B Square Die Set - 1 1/2" (7.5-180)180.083"395
303036M32B Square Die Set - 1 1/2" (7.5-90)90.083"355
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
305257M32B Die Set METRIC - 20mm (114.3R-180)1801.5 mm225
305258M32B Die Set METRIC - 20mm (114.3R-90)901.5 mm195
305259M32B Die Set METRIC - 20mm (139.7R-180)1801.5 mm250
305260M32B Die Set METRIC - 20mm (139.7R-90)901.5 mm200
305261M32B Die Set METRIC - 20mm (57.1R-180)1801.5 mm135
305262M32B Die Set METRIC - 20mm (76.2R-180)1801.5 mm145
305263M32B Die Set METRIC - 20mm (88.9R-180)1801.5 mm165
305264M32B Die Set METRIC - 22mm (114.3R-180)1801.5 mm235
305265M32B Die Set METRIC - 22mm (114.3R-90)901.5 mm205
305266M32B Die Set METRIC - 22mm (139.7R-180)1801.5 mm260
305267M32B Die Set METRIC - 22mm (139.7R-90)901.5 mm230
305268M32B Die Set METRIC - 22mm (165.1R-180)1801.5 mm280
305269M32B Die Set METRIC - 22mm (165.1R-90)901.5 mm250
305270M32B Die Set METRIC - 22mm (76.2R-180)1801.5 mm155
305272M32B Die Set METRIC - 22mm (88.9R-180)1801.5 mm175
305273M32B Die Set METRIC - 25mm (114.3R-180)1801.5 mm235
305274M32B Die Set METRIC - 25mm (114.3R-90)901.5 mm205
305275M32B Die Set METRIC - 25mm (139.7R-180)1801.5 mm260
305276M32B Die Set METRIC - 25mm (139.7R-90)901.5 mm230
305277M32B Die Set METRIC - 25mm (165.1R-180)1801.5 mm280
305278M32B Die Set METRIC - 25mm (165.1R-90)901.5 mm250
305279M32B Die Set METRIC - 25mm (76.2R-180)1801.5 mm155
305280M32B Die Set METRIC - 25mm (88.9R-180)1801.5 mm175
305281M32B Die Set METRIC - 28mm (114.3R-180)1801.5 mm245
305282M32B Die Set METRIC - 28mm (114.3R-90)901.5 mm215
305283M32B Die Set METRIC - 28mm (139.7R-180)1801.5 mm270
305284M32B Die Set METRIC - 28mm (139.7R-90)901.5 mm250
305285M32B Die Set METRIC - 28mm (165.1R-180)1801.5 mm280
305286M32B Die Set METRIC - 28mm (165.1R-90)901.5 mm250
305287M32B Die Set METRIC - 28mm (88.9R-180)1802.1 mm180
305288M32B Die Set METRIC - 30mm (114.3R-180)1801.5 mm245
305289M32B Die Set METRIC - 30mm (114.3R-90)901.5 mm215
305290M32B Die Set METRIC - 30mm (139.7R-180)1801.5 mm270
305291M32B Die Set METRIC - 30mm (139.7R-90)901.5 mm240
305292M32B Die Set METRIC - 30mm (165.1R-180)1801.5 mm280
305293M32B Die Set METRIC - 30mm (165.1R-90)901.5 mm250
305294M32B Die Set METRIC - 30mm (88.9R-180)1802.1 mm180
305295M32B Die Set METRIC - 32mm (114.3R-180)1801.5 mm245
305296M32B Die Set METRIC - 32mm (114.3R-90)901.5 mm215
305297M32B Die Set METRIC - 32mm (139.7R-180)1801.5 mm270
305298M32B Die Set METRIC - 32mm (139.7R-90)901.5 mm230
305299M32B Die Set METRIC - 32mm (165.1R-180)1801.5 mm280
305300M32B Die Set METRIC - 32mm (165.1R-90)901.5 mm250
305301M32B Die Set METRIC - 35mm (114.3R-180)1802.4 mm265
305302M32B Die Set METRIC - 35mm (114.3R-90)902.4 mm225
305303M32B Die Set METRIC - 35mm (139.7R-180)1801.7 mm280
305304M32B Die Set METRIC - 35mm (139.7R-90)901.7 mm240
305305M32B Die Set METRIC - 35mm (165.1R-180)1801.7 mm290
305306M32B Die Set METRIC - 35mm (165.1R-90)901.7 mm250
305307M32B Die Set METRIC - 38mm (114.3R-180)1802.4 mm265
305308M32B Die Set METRIC - 38mm (114.3R-90)902.4 mm225
305309M32B Die Set METRIC - 38mm (139.7R-180)1802.1 mm280
305310M32B Die Set METRIC - 38mm (139.7R-90)902.1 mm240
305311M32B Die Set METRIC - 38mm (165.1R-180)1801.5 mm290
305312M32B Die Set METRIC - 38mm (165.1R-90)901.5 mm250
305313M32B Die Set METRIC - 40mm (139.7R-180)1802.1 mm290
305314M32B Die Set METRIC - 40mm (139.7R-90)902.1 mm250
305315M32B Die Set METRIC - 40mm (165.1R-180)1802.1 mm300
305316M32B Die Set METRIC - 40mm (165.1R-90)902.1 mm260
305317M32B Die Set METRIC - 45mm (139.7R-180)1802.4 mm300
305318M32B Die Set METRIC - 45mm (139.7R-90)902.4 mm260
305319M32B Die Set METRIC - 45mm (165.1R-180)1802.1 mm315
305320M32B Die Set METRIC - 45mm (165.1R-90)902.1 mm275
305321M32B Die Set METRIC - 50mm (165.1R-180)1802.4 mm345
305322M32B Die Set METRIC - 50mm (165.1R-90)902.4 mm295
  Home   Printable Manuals   FAQ   Warranty   Contact Us   International Distributors
Powered by PDshop - ASP.NET Shopping Cart Software