International Distributors International Distributors
 
 
 Menu  
•Home Home
•Model 3 Bender Model 3 Bender
•Model 4 Bender Model 4 Bender
•Model 32 Bender Model 32 Bender
•TN-100 Tube Notcher TN-100 Tube Notcher
•Notch Master Notch Master
•Beast Notcher Beast Notcher
•Bend Software Bend Software
•Printable Manuals Printable Manuals
•Hydraulic Specs Hydraulic Specs
•FAQ FAQ
•Warranty Warranty
•Contact Us Contact Us
•International Distributors International Distributors
SS
 Model 4 Bender  
Model 4 Bender
$1,045
Includes 10-ton 14" stroke cylinder.

Actual stand does not have decals. Degree ring built-in, stand sold separately. 		Awesome power!
Bends round tubing from 1/2" to 2 1/2" diameter, square tubing up to 1 1/2", and up to 2" Schedule 40 pipe.

Built-in degree indicator makes it simple to make accurate, repeatable bends.

Anti-Springback locking lever for better bend control.

Heavy-duty construction - pictured here with 1-1/2" diameter tubing. 1" x 8" frame bolts, frame and drive arms are CNC machined from 1" and 3/4" steel plate.

Engineered To Be Reliable! - Painstakingly designed to last for years in a hard working fabrication shop. The hydraulic cylinder swivels in a solid CNC machined steel block that pivots exactly at the cylinder's center, preventing side loads on the cylinder's internals. The pusher block, seen in the lower center of the above photo, employs a unique rotating design and a swiveling bronze wear block so that the cylinder will not experience any up or down loading.

Self Locking, Hydraulic Operation! - The Model 4 employs a 10 ton single acting spring return cylinder with a stroke of 10" to 14". It operates up to 4000 p.s.i. With the recommended 14" stroke cylinder, 90 degree bends can be accomplished in less than two complete strokes and 180 degree bends typically require only three strokes. The 10" stroke cylinder requires three strokes for a 90 degree bend and usually five for a 180 degree bend. During bending, neither the die set nor the workpiece needs to be reset or touched in any way until the bending operation is complete. Using the spring loaded anti-springback lever, the Model 4 will lock the workpiece in position when the cylinder needs to be advanced to the next stroke position, therefore not allowing the workpiece to relax or shift in the bender. This makes possible much tighter radius bends in thinner wall material then can be accomplished on competing benders. Using a 14" stroke cylinder, the first bend stroke can be up to approximately 60 degrees. The second stroke will go to approximately 126 degrees. Bending speed is dependent upon the strength of the material being bent. Usually 6 to 10 degrees of bend per second will be realized. The 14" stroke cylinder takes 8 to 9 seconds to return from full extension. Add it all up and a typical 90 degree bend will take an effortless 20 to 25 seconds, depending on the operator's skill level. Note: Since the pump and cylinder used in the Model 4 is extremely popular, you may already have them. If so you wouldn't need to purchase these items. If you have any questions in regard to this please call for assistance.

AFFORDABLE! - The Model 4 Bender comes in several price packages:

  • Model 4 Bender (Does not include cylinder or pump) - $895.
  • Model 4 Bender with a Power Team high quality 14" stroke hydraulic cylinder - $1045.
  • Model 4 Bender complete with high quality Power Team 14" stroke cylinder and air/hydraulic pump and hose - ONLY $1515.00
  • Model 4 Bender complete with 14" stroke cylinder, fast 1 1/2 h.p. high volume pump, hydraulic hose and hand control unit - ONLY $1940

Model 4 Bender Pedestal- $145

The Model 4 Bender can be mounted to this optional stand. This pedestal is heavy duty! It stands 36 inches tall and can be bolted to a concrete floor.
Air/Hydraulic Pump w/ Hose - $470

Includes 10,000 psi hydraulic hose w/ quick disconnect coupler. Requires an air compressor.
4000 PSI Electric Pump with Hose - $1345 through JD2 only $895.00

Includes 5,000 psi hydraulic hose w/ quick disconnect coupler. Single-Phase 110VAC. Approximately 3 times the speed of the air/hydraulic pump.
Die Sets
Note: In the description column, the numbers in the parenthesis [ ex: (6.5-180) ] designate the die set's center line radius and maximum normal degree of bend. Therefore (6.5-180) would represent a die set with a center line radius of 6.5" and would be capable of producing a complete 180 degree bend. The "Center Line Radius" is the bend radius as measured from the center rotation point of the die to the middle of the tubing. The 'Minimum Wall Thickness' column represents the minimum wall thickness for consistent high quality wrinkle free bends. Wall thicknesses less than .083" may require an anti-springback block added to the followbar to help limit springback and prevent wrinkling. All die sets will bend up to .120" wall. Greater wall thicknesses may be bent with the smaller O.D. tubing and pipe up to the maximum power of the bender. Dies rated for 90 degree bends are actually machined to approximately 115 degrees and 180 degree dies are machined to approximately 210-220 degrees.
Custom die sets are available. Please call for pricing.
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
100714M4B Round Tube Die Set - 1/2" (2.25-CLR)0.058"135
100715M4B Round Tube Die Set - 1/2" (3-CLR)0.049"145
100716M4B Round Tube Die Set - 5/8" (2.25-CLR)0.049"135
100717M4B Round Tube Die Set - 3/4" (2.25-CLR)0.058"135
100718M4B Round Tube Die Set - 3/4" (3-CLR)0.058"145
100719M4B Round Tube Die Set - 3/4" (4.5-CLR)0.049"225
100721M4B Round Tube Die Set - 7/8" (3-CLR)0.058"145
100722M4B Round Tube Die Set - 7/8" (4.5-CLR)0.058"225
100723M4B Round Tube Die Set - 7/8" (5.5-CLR)0.058"250
100725M4B Round Tube Die Set - 1" (3-CLR)0.058"155
100726M4B Round Tube Die Set - 1" (3.5-CLR)0.058"175
100727M4B Round Tube Die Set - 1" (4.5-CLR)0.058"235
100729M4B Round Tube Die Set - 1" (5.5-CLR)0.058"260
100732M4B Round Tube Die Set - 1 1/8" (3.5-CLR)0.083"180
100734M4B Round Tube Die Set - 1 1/8" (4.5-CLR)0.058"245
100736M4B Round Tube Die Set - 1 1/8" (5.5-CLR)0.058"270
100739M4B Round Tube Die Set - 1 1/4" (3.5-CLR)0.083"180
100740M4B Round Tube Die Set - 1 1/4" (4.5-CLR)0.058"245
100742M4B Round Tube Die Set - 1 1/4" (5.5-CLR)0.058"270
100746M4B Round Tube Die Set - 1 3/8" (4.5-CLR)0.095"265
100748M4B Round Tube Die Set - 1 3/8" (5.5-CLR)0.065"280
100749M4B Round Tube Die Set - 1 3/8" (6.5-CLR)0.065"290
100750M4B Round Tube Die Set - 1 1/2" (4.5-CLR)0.095"265
100753M4B Round Tube Die Set - 1 1/2" (5.5-CLR)0.083"280
100756M4B Round Tube Die Set - 1 1/2" (6.5-CLR)0.058"290
100760M4B Round Tube Die Set - 1 5/8" (5.5-CLR)0.083"290
100762M4B Round Tube Die Set - 1 5/8" (6.5-CLR)0.083"300
100764M4B Round Tube Die Set - 1 3/4" (5.5-CLR)0.095"300
100766M4B Round Tube Die Set - 1 3/4" (6.5-CLR)0.083"315
100768M4B Round Tube Die Set - 1 7/8" (6.5-CLR)0.095"345
100770M4B Round Tube Die Set - 2" (6.5-CLR)0.095"345
100772M4B Round Tube Die Set - 2-1/4" (6.5-180)0.120"365
100775M4B Round Tube Die Set - 2-1/2" (6.5-CLR)0.120"475
100774M4B Round Tube Die Set - 2-3/8" (6.5-CLR)0.120"450
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
100659M4B Pipe Die Set - 1/2" Pipe, .840" OD (3-180)0Sch 40150
100661M4B Pipe Die Set - 3/4" Pipe, 1.050" OD (3.5-CLR)0Sch 40175
100662M4B Pipe Die Set - 3/4" Pipe, 1.050" OD (4.5-CLR)0Sch 40240
100664M4B Pipe Die Set - 1" Pipe, 1.315" OD (3.5-180)0Sch 40185
100665M4B Pipe Die Set - 1" Pipe, 1.315" OD (4.5-180)0Sch 40250
100666M4B Pipe Die Set - 1" Pipe, 1.315" OD (5.5-180)0Sch 40270
100686M4B Pipe Die Set - 2" Pipe, 2 3/8" (6.5-CLR)0Sch 40450
Part #DescriptionDegree BendMin. Wall ThicknessPriceClick to Buy
100691M4B Square Die Set - 1/2" (3-CLR)0.083"160
100692M4B Square Die Set - 1/2" (5.5-CLR)0.083"280
100693M4B Square Die Set - 3/4" (3-CLR)0.095"165
100694M4B Square Die Set - 3/4" (4.5-CLR)0.095"265
100696M4B Square Die Set - 1" (3.5-CLR)0.095"195
100697M4B Square Die Set - 1" (4.5-CLR)0.083"280
100699M4B Square Die Set - 1" (5.5-CLR)0.083"300
100701M4B Square Die Set - 1" (6.5-CLR)0.083"320
100703M4B Square Die Set - 1 1/4" (4.5-CLR)0.095"285
100705M4B Square Die Set - 1 1/4" (5.5-CLR)0.083"300
100707M4B Square Die Set - 1 1/4" (6.5-CLR)0.083"320
100709M4B Square Die Set - 1 1/2" (5.5-CLR)0.083"320
100711M4B Square Die Set - 1 1/2" (6.5-CLR)0.083"335
*Most dies are available with a 7.5' CLR. - Call for pricing.
Before ordering please review our sales and warranty policies. Thank You.

More Pictures


Lower frame painted red for clarity of demonstration, standard is glossy black.


Shown bending 1 1/2" x .095" wall tubing to a 4 1/2" radius. On the right is the hydraulic pump control. All links are 3/4" thickCNC machined steel. Complete with pump the Model 4 weighs 225 lbs. The pedestal is optional.





In the lower left corner of the picture above you can see the anti-springback lever.It is spring loaded and prevents the workpiece from moving when the hydraulic cylinder is being re-positioned for the next stroke.



In the top two pictures above can be seen the pusher block with its bronze pivot block. The handle makes re-positioning the hydraulic ram fast and easy. The average cylinder retract and re-position time is approximately 8-10 seconds. With the 2 HP pump the Model 4 bender strokes 60 degrees in 6-10 seconds.


The Model 4 is shown above in its retracted state. With a 14" stroke cylinder, it can bend approximately 60 degrees in one shot. After the ram extends the anti-springback lever automatically engages to prevent the workpiece from moving.
  Home   Printable Manuals   FAQ   Warranty   Contact Us   International Distributors
Powered by PDshop - ASP.NET Shopping Cart Software